Grinding wheel cutting machine operating procedures

1 Labor protection supplies must be in place before work to check whether the equipment has a qualified grounding wire. 2 Check to see if the thin flat cutting disc cutter is in good condition and the grinding wheel has crack defects. It is forbidden to use sick equipment and unqualified grinding wheel. 3 If the material is cut, the force may not be too strong or suddenly hit. If there is any abnormality, turn off the power immediately. 4 The material to be cut should be clamped with a vise. It is not allowed to support one person to cut the material, and the person must stand on the side of the grinding wheel when cutting. 5 When replacing the grinding wheel, wait until the equipment stops, and check the grinding wheel. 6 During operation, tools and other items are not allowed to be stored on the rack. 7 The grinding wheel cutting machine should be placed on stable ground, away from flammable materials, and the power cord should be connected to the leakage protection device. 8 The grinding wheel cutting piece should be installed as required, and the test starting operation should be stable before starting work. 9 The clamping device should be safe and reliable to prevent accidents from loosening the workpiece. 10 When cutting, the operator should evenly cut and avoid the front side of the cutting piece to prevent accidents caused by improper operation of the cutting piece. 11 After working, wipe the surface of the 12 inches cut off wheel cutter and clean the workplace. The open storage should be protected against rain.

asdfasda asdf asd a fas a as a asd a fas...